Campbell Hausfeld CHN90499AV Ultimate Nailing Kit

Buy Cheap Campbell Hausfeld CHN90499AV Ultimate Nailing Kit

Buy Low Price From Here Now
The three guns in this kit will meet just about every nailing need you'll encounter, from building decks and fences, framing, door jambs, window casings to finer details such as baseboards, crown moldings, chair rails, door casings, window casings, furniture and even crafts. If you've got a compressor, you've got what you need to put these nailers to great use.

The 21-degree full head framing nailer easily takes on the big jobs: room additions, decks and framing. It's got an adjustable exhaust, depth control and a removable non-marring tip. It feels good in hand, thanks to nice balance and a rubber comfort grip. It's a sturdy, hardworking nailer, definitely up to the challenge.

The 16-gauge contact-trip finish nailer is perfect for trim work, moldings, paneling and cabinet work, driving nails from 1 to 2-1/2 inches and setting them as deep or as shallow as you please. Like the framing nailer, this one also has a comfortable rubber grip, directional exhaust and a non-marring nose, which is easy to clear quickly in the event of a jam.

Readmore

Technical Details

- 1-1/4-inch brad nailer, 2-1/2-inch finish nailer, and framing nailer combo kit
- All nailers include adjustable depth control and adjustable exhaust
- Lightweight cast aluminum housing, rubber grips
- Includes 3-nailers
- 3-year warranty on brad and finish nailers; 1-year warranty on framing nailer
See more technical details

 "Nailing Tools" 2007-12-30
By Francis L. Shorey
I have used the framing and finish nailers and they worked great. Well worth the price and I would recommend them to anyone.

 "added value not included" 2007-11-17
By R. Dell
Although the nail guns arrived promptly and in perfect condition the product page stated there was to be an added value of a 12V cordless drill with Snap-on accesory case,12V battery pack, magnetic dashboard&targetlevel,and Snap-on accessory kit included. This was not the case. Amazon was informed and another complete order was processed and it to did not have the added value. I just sent the second order back to Amazon and will bite the bullet.

 "Framing nailer good, trim nailer BAAAAD!!!" 2007-10-21
By mbx5 (Western PA)
I had good luck with both the framing nailer and brad nailer. The finish nailer in my opinion is a horrible tool!! I would bet a 50% or less nail delivery, and of those 50%, 30% of them bend or get stuck half way out. I am using the corrrect nails, a Porter Cable pancake compressor w/ the correct pressure (tested on practice pieces first) - so none of this is because of incorrect nails or pressure. I pre-lubed the kit with a drop of oil into the air inlet, and also put some on the hammer after I found sparks coming out of it. I actually returned the whole kit today and got a new one on exchange - and the trim nailer was worse!!



It punches large holes into the trim and delivers no nails!! Then, you try to put the head back and match up to the huge hole it just made, and bam, a nail comes out about right next to the giant gaping empty hole and the nail gets jammed in the head!!



Like I said - framing and brad nailer worked ok....trim nailer - unless you are doing a soft pine, and are using putty and paint, forget it - it is a hack tool!!! Drill and hand hammer is what I ended up doing because this tool is a turd.



I am very upset with this because I wasted some 1x6 pieces of maple that we had finished by the amish to match our cabinets - I tried to put some putty in the holes but they literally look like I used drywall screws - thats how big they are!!!



Bad review from me on the trim nailer - sorry. The others are ok and I am happy with them, too bad the trim nailer is so poor!

 "Good tools lousy case" 2007-10-03
By Wildernessman (Boulder Creek, Ca. USA)
So far the the brad nailer has worked fine. They are well made with steel. Not plastic as many tools are nowdays. Haven't used the other two yet. The case is the worst part of the kit. The nailers don't stay in their slots when closing the case. Also the kit does not come with a cordless drill or any of the other extras as stated in the product description, so don't expect them. It is still worth the $189.

Steve

 "Great for the homeowner" 2007-05-15
By S. Ulrich (Arlington, Tx. United States)
I have has this set for about a year now and have used just the brad and framing nailer. Both worked great. I used the framing nailer to do some fencing and the brad to work on several things around the house. Both worked perfectly. A great value...


Images Product

Buy Campbell Hausfeld CHN90499AV Ultimate Nailing Kit Now

Campbell Hausfeld WG2060 90 Amp MIG/Flux Versa-Arc Welder

Buy Cheap Campbell Hausfeld WG2060 90 Amp MIG/Flux Versa-Arc Welder

Buy Low Price From Here Now
The Campbell Hausfeld WG2060 95 Amp MIG/Flux Versa-Arc welder can handle 24-gauge to 3/16-inch steel and accepts wire sizes of .024 inch, .030 inch, and .035 inch on 4-inch or 8-inch spools. A built-in gas liner and valve make the Campbell Hausfeld WG2060 welder MIG ready. Switch between MIG and Flux settings with the external polarity control. The welder's independent drive deck transformer provides consistent wire speed to make smoother welds. An automatic shut-off feature prevents overheating, and the infinite wire speed gives you the control to make precise adjustments for an even weld bead. The rotary heat switch has four settings to adjust output power to different metal thicknesses, and the professional torch and trigger-activated arc provide precise placement of your welds. This professional torch is equipped with trigger activated arc for easy start, is powered by a 115-volt current and generates 70 Amps of power. The Versa-Arc welder includes a welding shield, hammer/brush, starter spool of flux core wire, quick-start guide, and MIG regulator, hose, and clamps. Campbell Hausfeld backs its welder with a 5-year limited warranty.

What's in the Box
Welder, welding shield, hammer/brush, starter spool of flux core wire, quick-start guide, and MIG regulator, hose, and clamps.
Readmore

Technical Details

- Versa-arch welder powered by 115-volt current
- Welds 24-gauge to 3/16-inch steel
- Four settings for use on metal with varying thickness
- Polarity control switches between MIG and Flux settings
- 5-year limited warranty
See more technical details

 "great welder" 2009-05-18
By T. Stallard (Temple, TX)
Very versatile home MIG welder. Takes a little to change to really thin metals (less than 18 gauge), but one of the few welders for a home shop that can do it at all. I would definitely buy this one again.

 "You get what you pay for" 2009-05-05
By Lord Ulrich
It worked just fine for a while, when I attached a bottle to MIG weld instead of Flux Core the line leaked. The system used for the gas line was poorly designed. When I called the company they wanted $100 for the replacement part.

Overall it is an OK piece of equipment, but it is really a flux core welder not much of a MIG welder

 "AMPERAGE LISTED IS INCORRECT" 2007-12-10
By PDD kville (Kville, Iowa)
Your welder on this page is #2060. Your banner says #2060 welder is a 70 AMP welder. The description of this welder in the body of the descriptions says #2060 is a 90 AMP welder. All company adds show that the 2060 is a 90 AMP Welder...however, your banner seems to be incorrect. You might wish to change it...on all the other sites -- even the Campbell Hausfeld site shows the #2060 as a 90 AMP WELDER...On all other sites...the #2060 is a 90 AMP wleder for around $284. the #2050 is a 70 AMP and sells for $199. Persons wishing to purchase this welder will not purchase because of the inaccurate listing...it looks like a bad deal...however...if corrected to #2060 90 AMP...rather than 2050 70 AMP...it looks normal. Bottom line...your listing of #2060 is correct...as your description says...but only one word...70 AMP in the title is wrong.

 "Excellent Welder -- versatile and good quality!" 2006-03-28
By C. Sulto (Los Angeles, California, USA)
I had just bought a lower priced model CH welder at Walmart the week prior when I saw this model here on Amazon. I was not looking for an upgraded model like this to weld Aluminum, etc. but the Amazon coupon offer (at the time) made it too temping.

The free shipping was very fast via FedEx ground and arrived well padded and perfect.

I tried it out on some scrap metal and it worked well. The tension control needs to be played with a bit to get a perfect feed but other than that it's great. The four heat settings make welding the right materials a snap. You don't need a 20A circuit per se, but to use heat setting 4 for any length of time you will.

I asked my cousin, aka Big Country (a senior welder), to give me his thoughts and he said it could not have been beat for the dollar and that it was "nice!"


Images Product

Buy Campbell Hausfeld WG2060 90 Amp MIG/Flux Versa-Arc Welder Now

Campbell Hausfeld PA1178 50-Foot-by-3/8-Inch PVC Air Hose

Buy Cheap Campbell Hausfeld PA1178 50-Foot-by-3/8-Inch PVC Air Hose

Buy Low Price From Here Now
3/8" x 50' Air Hose With 1/4" Male Fittings On Each End, Working Pressure 300 PSI, Burst Pressure 800 PSI.
Readmore

Technical Details

- Economical 50-foot air hose
- 0 to 130-degree (F) working temperature
- PVC construction provides lightweight handling and heavy-duty durability
- Includes male 1/4-inch NPT fittings on both ends
- 3/8-inch by 50 feet long; weighs 4.1 pounds shipped
See more technical details

 "works" 2009-06-09
By Blazer (illinois)
Its an air hose, it works, it don't leak. A bit stiff in cold weather, but it was cheap.

 "Air Compressor hose" 2009-05-07
By Chris L. Geighes
I am sure this one would work fine, but needed one that was more flexible.

 "Good product for price..." 2009-01-31
By Charles S. Lombardo (Bradenton, FL)
This air hose is a very good product at a good price...A little stiff on recoil but very functional...I am satisfied with it's performance...

 "PVC Air Hose" 2008-10-28
By H. Quay (Dryden, NY USA)
For the price the Campbell Hausfield 50Ft x 3/8 air hose is fair deal. I bought this hose because I needed some additonal reach to make it easier to use my air nailer for inside trim work. It seems durable enough, but because it is PVC it is very stiff when cold and holds the coiled shape making it unwieldy. If you want flexibility and ease of use opt for rubber hose.

 "Fine by me" 2008-04-08
By A. Customer (Sherwood, OR)
It's air hose. I mean how much can you review an airhose. It has the holes in the right spot (on the ends) so whoopty freakin' do.


Images Product

Buy Campbell Hausfeld PA1178 50-Foot-by-3/8-Inch PVC Air Hose Now

Campbell Hausfeld VT6275 15 Amp 3.2-Horsepower 60-Gallon Oiled Vertical Compressor

Buy Cheap Campbell Hausfeld VT6275 15 Amp 3.2-Horsepower 60-Gallon Oiled Vertical Compressor

Buy Low Price From Here Now
, 60-gallon ASME air tank, Runs on 240V single phase, Comes complete pressure switch, pressure gauge and relief valve, Oil-lubricated, Belt driven, Delivers 11.8/10.3 CFM at 10/90 PSI, Weighs 247 lbs., 66" tall.
Readmore

Technical Details

- Heavy duty CAST IRON oil lubricated twin cylinder pump
- High air flow to power a wide variety of air tools
- Product life of up to 5000 hours based on b-10 bearing rating
- Quietest operation
- Durable and safe 60 gallon ASME code tank for greater air storage
See more technical details

 "Free shipping isn't free" 2009-05-20
By Cam Banks (Santa Clara, CA USA)
As of 5/09, Lowe's has this model in stock locally for $438, so you're paying about $160 extra for "free" shipping from Amazon. Also, Harbor Freight appears to have a reconditioned version of this unit (or very similar), which they will ship to you for a total of only about $400. Looks like a good unit though; I will probably buy it shortly to replace my rusted-out, 10-year-old Devilbiss 26-gallon unit (when they say drain the tank after each use, they mean it!).

 "Excellent Air Compressor!" 2009-02-01
By Darren W. Toler (Houston, TX USA)
This is an excellent air compressor! It definitely fills the needs for my home garage use. It is reasonably quiet given its size, and has so far run any tool that I have tried which includes a cutoff tool, air chisel, air ratchet, impact wrench, tire inflator, and an air drill. I haven't yet tried a paint sprayer, but give the size of the tank and the CFM rating I think it would handle it pretty well, perhaps with some waiting for it to repressurize. I expect it will run air sanders just fine as well. Just be sure to check the SCFM of what you want to use against the air compressors rating.



It does not come with a filter/regulator or wiring for 220V, so you do need to do a little work to get it installed. That this standard for air compressors in this size range though, so I have no complaints there.



I just left the unit bolted to the shipping pallet and sat it in the corner of my garage. For 220V, I wired a plug on 220V wire so I can run it through my laundry room door and plug it into my dryer outlet when I need to use it. Not optimum, but it is a working solution until I have a garage that is wired for 220.



If you need a powerful home compressor, you won't be sorry you bought this one!

 "CH VT6275" 2007-11-22
By Craig T. Rose (Schenectady, NY)
I am very pleased with this unit, it is just what I was looking for, powerful and much quiter than I expected it to be. The only downfall is that you need to wire the unit yourself, although if you are handy with electric it is fairly easy to install. The "free" shipping from Amazon is an excellent bargin. I highly recommend this unit.

 "ALOT OF POWER" 2007-04-22
By Jorge Lopez (TURLOCK CA)
I BOUGHT THIS AIR COMPRESSOR SO I CAN USE AIR TOOLS WHEN I NEED TO AT HOME. THIS THING IS POWERFUL AND I RECOMMEND TO ANYONE. IT CAN HANDLE ANY AUTOMOTIVE TOOL. I HAVE SANDBLASTED MANY TIMES WITH IT. ITS A CHAMP !

 "Good purchase and delivery" 2007-03-26
By Fred R (Lake Orion, MI USA)
I just received my unit several days ago. It was purchased to replace an aging Sears 2 HP compressor, which had mysteriously turned itself on during the night (even though the switch was Off!) and kept running, overheating and filling my home with oily smoke.

The purchase and delivery experience was great. I got the free shipping, and was expecting this would take 2-3 weeks on the slow train. I was surprised to get a call from the freight company two days after I ordered it, asking when I wanted it delivered. It arrived in perfect condition.

True to market hype, the 6.5 HP rating advertised is actually an overstatement. The label on the unit says it is a 3.2 HP, and that makes sense given the current draw. A true 6.5 HP unit would require a 30-50A circuit, like my Delta 5HP Unisaw. But this unit meets my needs at a good price.

Campbell Hausfeld makes this identical unit for a lot of other manufacturers... you'll notice different paint colors, but it's the same unit. Surprisingly, some other manufacturers charge more... as far as I can tell only the paint color and brand sticker is different. Buy this one and save yourself some money.

A downside over some of the cheaper units is that you'll need to provide your own electrical cord, air regulator and plumbing from the tank. I purchased Campbell Hausfeld's vertical compressor mount kit direct from their website for about $11. It comes with rubber and metal plates, as well as lag screws and lag shields to safely mount the unit to the floor. I've also purchased a flexible pipe to make the connection from the compressor tank (after a ball shutoff valve) to the rest of the plumbing in my system.

The cast iron compressor pump is definitely quieter than my old aluminum one was. The unit operates very smoothly and relatively quietly for a compressor, but it's still noisy.

I'll submit an update after I've used the unit for a while, but so far, so good.


Images Product

Buy Campbell Hausfeld VT6275 15 Amp 3.2-Horsepower 60-Gallon Oiled Vertical Compressor Now

Campbell Hausfeld WL6111 26 Gallon ASME Vertical Air Compressor

Buy Cheap Campbell Hausfeld WL6111 26 Gallon ASME Vertical Air Compressor

Buy Low Price From Here Now
5HP, 26 Gallon Vertical Compressor, Direct Drive Oilless Pump, Attached Wheels, Delivers 6.9 CFM @ 40 PSI & 5.5 CFM @ 90 PSI, Made In USA, UL Listed, Carries Standard Duty One Year Warranty.
Readmore

Technical Details

- Built in tool and accessory storage helps organize the garage
- Vertical orientation saves 50% more space
- Easy to operate controls with descriptive icons and oversized gauges for quick reference
- Large air resevoir for extra storage during heavy duty tasks around the home
- Maintenance free oil less pump with a durable shroud covering hot moving parts
See more technical details

Images Product

Buy Campbell Hausfeld WL6111 26 Gallon ASME Vertical Air Compressor Now

Campbell Hausfeld PA2121 Standard Air Filters

Buy Cheap Campbell Hausfeld PA2121 Standard Air Filters

Buy Low Price From Here Now
3/8" Compressor Airline Filter, Removable Filter Element, Pressure Range 20 To 150 PSI, 1 To 10 Scfm Volume Range.
Readmore

Technical Details

- Removes unwanted dirt particles and condensed water to extend tool life
- 5 micron element provides maximum filtration
- Metal bowl-guard protects against impacts
- Quick release bowl and quarter turn drain for easier use
- 57 SCFM flow capacity at 90 PSI
See more technical details

 "EXCELLEN T FILTER" 2008-10-02
By Powell D. McClellan (murfreesboro, TN)
I needed a filter and regulator combination. This over/under combination reducted space and does an excellent filtering process. I would definitely recommend for use as filter prior to spray painting with controlled psi.


Images Product

Buy Campbell Hausfeld PA2121 Standard Air Filters Now