Campbell Hausfeld CC2400 12-Volt Cordless Inflator Worklight

Buy Cheap Campbell Hausfeld CC2400 12-Volt Cordless Inflator Worklight

Buy Low Price From Here Now
Portable, cordless design for camping, road trips, auto safety and fast easy inflation of tires and sporting equipment. Extra outlet to provide power to run most 12 volt products. Bright work light aids in nighttime emergencies. Built-in tire pressure gau ge automatically shuts off the pump when preset pressure is achieved. A 15-amp fuse provides overload protection. Includes 3 inflation accessories including needle for sports balls and other adaptors. 8.5 pounds, 11.75" length x 6" width x 9" height.
Readmore

Technical Details

- Built-in pressure gauge simplifies monitoring tire pressure
- Digital gauge will automatically shut off pump when preset pressure is achieved
- Extra outlet provides power to run most 12-volt products
- Bright work light aids in nighttime emergencies
- Cooling fan gives extended unit life and reliability
See more technical details

 "Ok air inflator " 2008-11-23
By roy
Purchased this air inflator for my vehicle tires.



Pros: Can charge the battery using an electrical outlet or with your car cigarette lighter



Cons:

The unit rotates while operating due to vibrations.

The clasp on the end of the air hose is made of plastic

Takes time to inflate a tire (to add 3 psi to my tire it took almost 2-3 min)

Storage compartment for the air hose and accessories is very tight and it is difficult to fit all the items in the compartment

 "Don't buy this" 2008-09-24
By CarolynLF (Pacific NW)
Worked great for the 6 times I used it. After about a year, the battery would not hold a charge and it can't be used plugged in so I don't recommend buying this product.

 "Nice for price!" 2008-09-19
By P. Baker (Neosho, MO USA)
Can't speak for long term value yet; but, I've used it twice & it works like a charm! Had no problem airing up two flats & another half-flat tire on a stored car the other day... & that was on a charge. Is a little loud, but seems to put out a lot more PSI than most it's size. Cut-off switch is nice feature, too. Would recommend to anyone, easy to use.

 "Absolute GARBAGE" 2008-07-08
By Rincon (Franklin, WI United States)
Battery will not hold charge for more than 48 hours. If kept on the charger, it'll run for 30-40 minutes until dead. Pressure gauge with auto-off at a given pressure is nice, but nothing makes up for a junk battery.

 "Good while it lasted for less than a year" 2007-08-10
By James Wedewer
Bought this for inflating tires, good price, and portability for the once or twice a year I need it. Well, it did okay in the garage, did fine on the one place I needed to take it, and now the battery is totally dead. Won't take a charge even though the light is on. While I might be able to figure out a way to swap the battery, my experience with things like this is that the battery alone usually costs more than the whole unit (I only paid $20 for mine on a special weekend sale). It just barely works if I plug in the charger and let it sit for 30 minutes...and then only if I leave the charger plugged in which you're not supposed to do (as it may blow the tiny transformer in the charger). Oh well...now I'm looking for a new compressor but will probably just buy one from Costco with their "lifetime" warranty.


Images Product

Buy Campbell Hausfeld CC2400 12-Volt Cordless Inflator Worklight Now

Campbell Hausfeld CHN10399 3/8-Inch to 1-1/4-Inch 18-Gauge Narrow Crown Stapler

Buy Cheap Campbell Hausfeld CHN10399 3/8-Inch to 1-1/4-Inch 18-Gauge Narrow Crown Stapler

Buy Low Price From Here Now
Whether you’re tired of that manual stapler or just ready to upgrade, this 18-gauge pneumatic crown stapler from Campbell Hausfeld offers a world of user-friendly features for stapling delicate trim work, light cabinet assembly, and more. This versatile stapler accepts a wide range of staples from 3/8- to 1-¼ inches in length. The narrow, ¼-inch staple width provides steadfast attachment with minimal surface impact. An adjustable depth control offers precision countersinking or flush stapling at your fingertips for stapling trim of varying thicknesses or fastening upholstery to hardwood furniture. A multi-directional exhaust is easy to adjust; keeping discharge out of your face and off the workpiece so you can focus on the stapling. A quick-clear nose means easy jam clearing for less downtime and more productivity. And, a non-marring tip will not dent the work surface for better looking cabinets, upholstery, furniture and trim. Best of all, a rubber comfort grip and sequential trigger make repetitive tasks like underlayment installation and upholstering a breeze. --Brian D. Olson

What’s in the Box
Crown stapler, 1-inch finishing staples, male plug, 2 hex wrenches, tool oil and carry case
Readmore

Technical Details

- 3/8- to 1-1/4-inch 18-gauge narrow crown stapler
- Adjustable depth guide; quick-release nose door for fast jam clearing
- Non-marring tip will not dent the work surface
- Includes 1-inch finishing staples, male plug, 2 hex wrenches, oil, carry case
- 3-year warranty
See more technical details

 "Great staple gun" 2009-07-14
By E. Vontauffkirchen (Bayfield, CO USA)
This gun works great with the little compressor that I bought my husband last father's day. He used it to put hex netting up on our newly built fence, and we love it.

 "It's cheap but works fine" 2009-06-04
By M. Lapham (Colorado)
I wanted a cheap stapler that works well enough for my needs (occasional use). This really fits the bill. I have other Campbell Hausfeld air nailers and they all work fine.

 "Great product" 2009-05-09
By James A. Willis (bowling green,kentucky)
The Campbell-Hausfield air stapler arrived in perfect condition and works

like is supposed to do. I could not ask for a better product or at better price

James

 "questionable quality, but works well" 2009-03-06
By Gary W Turner (Houston, TX)
Questionable quality. I've had the gun just over a month and found it easy to use, lightweight, nice balance. I was fairly impressed. Then it just quit working, I'm guessing a seal ruptured somewhere inside b/c it just leaks instead of firing.

If I could get hold of someone at customer service I would find out what is wrong for sure, but they don't answer the phone, even during their limited office hours, and seemingly don't respond to their email. I'm sure it's still under warranty, but probably won't be by the time I finally get hold of someone.



UPDATE:

The leak was apparently the result of a seal getting dry on the shelf and coming unseated. It was a quick DIY fix. Since then, I've been using it regularly without any problems or complaints. I'd change the rating to a 4* if I could.

 "Campbell Hausfeld CHN10399AV - 18 Gauge Narrow Crown Stapler" 2008-07-15
By Enrico J. Sansone (New York, NY)
Campbell Hausfeld CHN10399AV 3/8-Inch to 1-1/4-Inch 18 Gauge Narrow Crown StaplerExcellent product! Performs very reliably - jams infrequently to not-at-all. Would recommend this stapler on a par with any of the more "popular" brands.


Images Product

Buy Campbell Hausfeld CHN10399 3/8-Inch to 1-1/4-Inch 18-Gauge Narrow Crown Stapler Now

Campbell Hausfeld HV2500 58 CFM Fine Finish HVLP Paint Sprayer

Buy Cheap Campbell Hausfeld HV2500 58 CFM Fine Finish HVLP Paint Sprayer

Buy Low Price From Here Now
Delivers a fine finish with low overspray. Ideal for painting or staining cabinets, trim, furniture, machinery and equipment. 58 CFM - 5 PSI. 2-Stage turbine motor. Transfer efficiency - 85%. Includes: HVLP spray gun, 25' hose. 2 Needle/nozzle sets, wrench, viscosity stick, strainers, and cleaning brush. Sprays: Light, medium, heavy-stains, varnishes, oil-based paint, latex. Weight 26 lbs.. MADE IN USA.
Readmore

Technical Details

- HVLP fine finish paint sprayer with 2-stage tangential turbine and 2 air filters
- Sprays light, medium, heavy-stains, varnishes, oil-based paint, and latex
- Durable metal body, plastic hose
- Includes spray gun, 25-foot hose, 2 needle/nozzle sets, wrench, viscosity stick, strainers, cleaning brush
- 12-1/2 by 22-1/2 by 12-1/2 inches; 32 pounds; 3-year limited warranty
See more technical details

 "Very nice sprayer" 2009-03-04
By Mike M (Northern California)
While this may not be the best HVLP on the market I give it 5 stars because I was able to very easily do exactly want I wanted to with it.



I had never used anything like this before but I decided to give it a try with the kitchen cabinets that I was building. I was very apprehensive about my ability to use it correctly, but I was actually amazed at how smooth of a finish I was able to get with it. A professional job could not look any better...



I used this solely with Minwax oil based satin finish polyurethane, which was of the correct viscosity straight out of the can.



I consider the cleanup of the gun to be much easier than cleaning out a paint brush, even though I used an oil based product with it.



As far as over spray goes, there still will be quite a bit, so cover everything up well around the area you are spraying in.



If you are debating on whether to spray or not, and you have a lot of material to cover, I would highly recommend using this sprayer, as I know that it saved me many days of brushing and I would have never got as smooth of a job without this.

 "Magnificent" 2008-10-21
By Angela George (Trinidad and Tobago)
The paint sprayer works magnificently for me, it saves me time, and time is money here in Trinidad. I would recommend this product to anyone who is in the painting business.



Angela

 "Work great" 2008-10-13
By P. Gray
I just sprayed water-based polyurethane on the inside of some kitchen cabinets I'm making. The sprayer worked great, and saved me a lot of time. It's reasonably easy to clean since I'm using water.

 "Great Unit! Hugh step up from cheaper home store models" 2008-09-17
By R. Phillips (MS USA)
We use this to apply floor dyes and it works amazingly well. No leaking like you get with the cheaper models. It does exactly what we needed it to do. It sprays out a lot more than the cheaper models so you need to practice to get the hang of it...and be careful for overspray that sprays out wider from this unit. Great unit and worth the price.

 "Hold out for a better HVLP" 2008-06-15
By M. Conger (Dana Point, CA United States)
I've had this unit for a couple of years now...and in short it's priced fairly. Not too great but not too bad. It got me started with HVLP. It just does not have enough power for shooting any thick (even kinda thick) finish. If you just want to shoot waterborne poly it works fine.



I wanted to shoot paint and oil based poly. For paint, forget it. Even with the heavy needle it just shoots splatter. For oil based poly it can't shoot a smooth even finish. With the heavy needle in it you get orange peel.



It was a good intro machine for me, but I ended up going for the top end

Accuspray on the second go round. Triple the price but you get professional results (why waste your time spraying if you get sub-par results?) and 3M's PPS which makes clean up a breeze. You know it's hard to justify the price for an expensive unit but think how many hours you have into your project. Why risk an average finish on it.


Images Product

Buy Campbell Hausfeld HV2500 58 CFM Fine Finish HVLP Paint Sprayer Now

Campbell Hausfeld PW2002 2,000 PSI 1.9 GPM Tecumseh 4 HP Gas Powered Pressure Washer With 25-Foot Hose

Buy Cheap Campbell Hausfeld PW2002 2,000 PSI 1.9 GPM Tecumseh 4 HP Gas Powered Pressure Washer With 25-Foot Hose

Buy Low Price From Here Now
Includes 2000 PSI Gas Pressure Washer - PW2002, Steel reinforced gun, 25 ft. high pressure hose
Readmore

Technical Details

- 4.0 HP Tecumseh engine
- Compact cart design with semi pneumatic wheels for easy transport and storage
- Thermal relief valve protects and prolongs pump life
- Includes adjustable fan lance
- 25 foot high pressure hose with steel reinforced gun
See more technical details

Images Product

Buy Campbell Hausfeld PW2002 2,000 PSI 1.9 GPM Tecumseh 4 HP Gas Powered Pressure Washer With 25-Foot Hose Now

Campbell Hausfeld PA1178 50-Foot-by-3/8-Inch PVC Air Hose

Buy Cheap Campbell Hausfeld PA1178 50-Foot-by-3/8-Inch PVC Air Hose

Buy Low Price From Here Now
3/8" x 50' Air Hose With 1/4" Male Fittings On Each End, Working Pressure 300 PSI, Burst Pressure 800 PSI.
Readmore

Technical Details

- Economical 50-foot air hose
- 0 to 130-degree (F) working temperature
- PVC construction provides lightweight handling and heavy-duty durability
- Includes male 1/4-inch NPT fittings on both ends
- 3/8-inch by 50 feet long; weighs 4.1 pounds shipped
See more technical details

 "works" 2009-06-09
By Blazer (illinois)
Its an air hose, it works, it don't leak. A bit stiff in cold weather, but it was cheap.

 "Air Compressor hose" 2009-05-07
By Chris L. Geighes
I am sure this one would work fine, but needed one that was more flexible.

 "Good product for price..." 2009-01-31
By Charles S. Lombardo (Bradenton, FL)
This air hose is a very good product at a good price...A little stiff on recoil but very functional...I am satisfied with it's performance...

 "PVC Air Hose" 2008-10-28
By H. Quay (Dryden, NY USA)
For the price the Campbell Hausfield 50Ft x 3/8 air hose is fair deal. I bought this hose because I needed some additonal reach to make it easier to use my air nailer for inside trim work. It seems durable enough, but because it is PVC it is very stiff when cold and holds the coiled shape making it unwieldy. If you want flexibility and ease of use opt for rubber hose.

 "Fine by me" 2008-04-08
By A. Customer (Sherwood, OR)
It's air hose. I mean how much can you review an airhose. It has the holes in the right spot (on the ends) so whoopty freakin' do.


Images Product

Buy Campbell Hausfeld PA1178 50-Foot-by-3/8-Inch PVC Air Hose Now

Campbell Hausfeld PW1750 1,750 PSI 1.4 GPM Electric Pressure Washer With 20-Foot Hose

Buy Cheap Campbell Hausfeld PW1750 1,750 PSI 1.4 GPM Electric Pressure Washer With 20-Foot Hose

Buy Low Price From Here Now
Includes 1750 PSI Electric Pressure Washer (1.5 GPM) - PW1750, (1) Adjustable Fan Lance, (1) Turbo Lance, (1) Detergent Bottle
Readmore

Technical Details

- Instant start and stop feature protects and prolongs the life of the motor
- Uses 80 percent less water than a garden hose
- Swivel connect adapter makes it easier to attach garden hose
- 35 foot electric cord with GFCI plug works in standard household outlets
- 20 foot high pressure hose
See more technical details

 "Keep looking, pass by this model" 2009-07-17
By Todd (Phoenix, AZ)
The pressure washer works adequately but leaks excessively at the hose attachment as noted by prior reviews. Six weeks after purchasing, the hose has sprung two major leaks. Not worth warranty work if you can get through to the center - call wait time is outrageous. A bad product and waste of resources to create it.

 "Very good for a fair price" 2009-07-13
By zeke12
If you are looking for an inexpensive electric power washer, this should fit the bill. It has power and seems to be sturdy enough for home duty. No problems so far.

 "A real peice of junk! Don't even think about it." 2009-06-13
By
Buy it and you just made aa mistake! Cheap peice of garbage. Low pressure, poor quality, handle comes off too easily, and leaks like crazy. Too much hassle to use it.



Dont buy this product. Period!!!!!

 "don't buy it" 2009-06-13
By Jay F. Steele (pittsburgh,pa)
This pressure washer is a piece of garbage. Don't waste your money! It leaks very, very, badly. I did get a nice bath with it. It is made of very cheap plastic the handle kept popping off. I sent this back and was very disappointed with it. It didn't even clean bird droppings in the driveway.

 "Works fine" 2009-06-12
By Joseph Hubenschmidt
Arrived with nothing broken or missing. No leaks when assembled - worked fine. The instructions for assembly are a little sketchy, however.



Do not follow T Tran VNF's advice on the teflon tape. The high pressure connections use o-rings. Lightly grease on assembly and if there is a leak check the o-ring. The low pressure connection uses garden hose rubber washers - the supplied washers are the same color as the connector (black) and hard to spot. A leak here means the washer fell out. Grab a new one at the hardware store.



I agree with the other reviewers that the plastic parts need to be handled with care. The provisions for spooling up the power cord and hose are bare bones too.



All in all a good buy for $150.


Images Product

Buy Campbell Hausfeld PW1750 1,750 PSI 1.4 GPM Electric Pressure Washer With 20-Foot Hose Now

Campbell Hausfeld TL1069 62-Piece Pneumatic Tool Kit

Buy Cheap Campbell Hausfeld TL1069 62-Piece Pneumatic Tool Kit

Buy Low Price From Here Now
Includes 61-Piece Air Tool Kit - TL1069, (1) 3/8" Air Ratchet, (1) Air Hammer, (1) Hammer Retainer Spring, (10) Sockets (12mm, 13mm, 15mm, 16mm, 17mm, 1/2", 9/16", 5/8", 3/4" and 13/16"), (1) 3" Extension Bar, (1) 3.8" (F) - 1/2" (M) Socket Adapter, (1) 3/8" Socket-Screw Bit Adapter, (1) 1/4" Swivel Adapter, (1) 1/4" NPT(M) Coupler, (5) 1/4" I.M Plugs 1/4" NPT(M), (1) 1/4" NPT(M) Hose Coupler, (1) 1/4" NPT(F) Hose Coupler, (1) Blow Gun, (6) Blow Gun Accessories, (3) Chisel Bits, (20) Screwdriver Bits, (1) 1/4" NPT Tire Chuck, (1) Pencil Tire Gauge, (1) Roll of PTFE Thread Sealant Tape, (1) Bottle of Air Tool Oil, (1) 4mm Allen Wrench, (1) Blow Molded Case
Readmore

Technical Details

- 62-piece pneumatic tool kit ideal for do-it-yourself jobs
- Includes a 1/2-inch impact wrench with 250 foot-pounds of torque for quick removal of stubborn bolts and nuts
- Included 3/8-inch ratchet with 50 foot-pounds of torque removes and installs nuts, bolts, and sparkplugs quickly
- Kit also includes 1-5/8-inch air hammer; blowgun with 6 accessories; 10 impact sockets; and much more
- Includes a high-impact carry case
See more technical details

 "Air Tool Kit" 2008-04-01
By John Whittaker (Va Beach, Va.)
I didn't see anywhere in the order that this was a used product. I may be mistaken, however; it does seem used. Grease stains on the ratchet. Otherwise, the shipping was very fast and I am pleased with it. Thanks.

 "You need a big compressor" 2008-03-04
By Luis V. Cortina Cuervo (Caracas - Venezuela)
The air tool kit look well, but you must know that you require a minimum 5 HP 13 Gal. or equivalent air compressor.

 "great starter kit" 2007-07-09
By Autodidact (Brooklyn, NY United States)
I found that the quality of the tools are very good for the price of the kit. The kit is also well made and holds the tools nicely. I did have to buy a bigger air compressor as my first compressor didn't push enough air to run the tools for continuous use..


Images Product

Buy Campbell Hausfeld TL1069 62-Piece Pneumatic Tool Kit Now

Campbell Hausfeld VT6290 20 Gallon ASME Oil-Lubricated Horizontal Air Compressor

Buy Cheap Campbell Hausfeld VT6290 20 Gallon ASME Oil-Lubricated Horizontal Air Compressor

Buy Low Price From Here Now
Heavy-duty cast iron compressor powers variety of air tools for the serious do-it-yourselfer, professional or contractor. Cast iron, oil-lubricated, twin cylinder pump has quietest operation. Product life up to 5,000 hours. Safe, durable ASME code tank fo r greater storage. 5.5 at 90 PSI, 6.5 at 40 PSI. SPECIFICATIONS: 2 HP, 120/240-volt, 37"Length x 21"Width x 30-1/2"Height. 148 lbs. tool weight.
Readmore

Technical Details

- Heavy duty CAST IRON oil lubricated twin cylinder pump
- Powers a variety of air tools for the serious do it yourselfer or contractor
- Product life of up to 5000 hours based on b-10 bearing rating
- Quietest operation
- Durable and safe ASME code tank
See more technical details

 "Damaged in shipping" 2009-06-23
By Darin Mccoy (Norman, OK United States)
I sent this item back for a refund due to shipping. I would not order another one because I am certain the shipping will not be any better.



Flimsy box without any protection.

 "Arrived Damaged" 2009-06-04
By Joseph R. Dobrzanski (Valrico, FL)
Shipped via UPS. Several parts were damaged and will require replacement including the regulator and discharge tube. Campbell Hausfeld told me to deal with Amazon and/or UPS. I just ordered the parts instead of going through that hastle. So since I have to buy some parts to use this thing I cannot recommend ordering this through Amazon.

 "Great air producer" 2007-09-30
By C. Borst (Ft. Worth, Tx.)
I would highly recommend this product to anyone with a woodworking shop.

After searching the internet for a compressor, I found that Amazon had the best quality compressor for the lowest price. Thanks Amazon.Campbell Hausfeld VT6290 15 Amp 2 Horsepower 20 Gallon Oiled Wheeled Single Tank Compressor

 "Poorly packaged" 2007-07-04
By M. Hartke (Effingham, ILL)
The product would have been fine but I received the compressor upside down. I believe the flimsy box it was packaged in was the main problem. Also the product is to heavy for normal delivery and it just gets thrown around by ups. I had to return my item because the gages were all broken. The motor mount was bent down, cooling fins on the head were broke and it was all beat up. I returned it and bought a quincy.

 "Might work if received undamaged.......and with oil...and a few fixes" 2006-07-15
By M. Ward (Port Jervis, NY United States)
I too had a shipping problem though with another carrier (ABF). The shipping box is flimsy and cannot adequately support nor protect the compressor and parts. Mine arrived with a broken regulator, pressure gauge and air-filter assembly all of which apparently snapped off during shipment with no visible exterior box damage.



As the other reviewer also mentioned the compressor does NOT come with oil so be sure to have SAE30 air-compressor oil ready when it arrives. The manual does indicate the usage of Mobil 1 synthetic 10W-30 too. Also, you will need to provide your choice of air outlet connector.



If it wasn't for the bad shipment packaging I'd say initially that the compressor is a good buy but if Campbell Hausfeld has so little regard to protecting their product in shipment to you I question the integrity of the machine itself. The better products all seem to have better packaging and this one ranks poorly and for that I give it 3 stars tops.



UPDATE 7/15: I am updating this review a full day after receiving and can add more to the trials and tribulations of purchasing a C-H compressor.



I was able to replace the broken regulator and gauge with a Home Depot Husky replacment for $17.99. The oil was another $3 (buy two pints as you need to replace the oil after 1 hour use). A 1/4" quick connect female added $4 as well. The air filter assembly is currently taped but working until I can get a replacment.



After replacing the parts and turning on to run for the 10 minute break-in period I was plagued with mutliple leaks. One leak occurred in the main pipeline to tank (seal was improperly installed), another in the undamaged tank pressure gauge (somone missed adding teflon tape) and the third in the pressure tubing to the cutoff switch (not tightened). All in all if you include travel time to Home Depot nearly 2-1/2 hours were spent just getting the compressor to work only to discover that there is a leak at weld where the pump mount attaches to the tank.



On the plus side is the quietness and the nicely powered 120/240v motor. Do watch r gauge of wire (use 12ga min.) if using an extension cable as this compressor does draw a load when starting.



IMHO I wouldn't order a product like this if you need it for an immediate job as it will take to either repair yourself or to return and await a replacement. I have not heard back from Amazon Customer Service as yet and I am still pondering exchanging or flat out returning the item while waiting for Amazon to consider what avenue of resolution to pursue. I needed this compressor to replace my dead one and ordered it to coincide with my time at home as I could not expect my wife to unload it. I replaced the parts so that I could at least have use during the upcoming week off.



To Amazon: it is just as important for you to insure that your customer will receive a product undamaged and to that end I lay partial blame on you for not checking product quality and packaging. It is now my decision that I will be returning this item.


Images Product

Buy Campbell Hausfeld VT6290 20 Gallon ASME Oil-Lubricated Horizontal Air Compressor Now

Campbell Hausfeld MP6000 Tire Inflator with Gauge

Buy Cheap Campbell Hausfeld MP6000 Tire Inflator with Gauge

Buy Low Price From Here Now
Garage Style Inflation Gun, Chuck & Gauge, Clip Design Enables Hands-Free Use Of Chuck, Built-In Rrelief Valve Reduces Pressure In Over-Inflated Tires.
Readmore

Technical Details

- Inflation gun, chuck, and gauge are all combined in one easy to use unit
- Clip-on design enables hands-free chuck use
- Built-in relief valve for reducing pressure in over-inflated tires
- Includes flexible hose for easier use
- Gauge has range of 10-140 psi
See more technical details

 "Tire inflator" 2009-06-28
By Wayne W. Spencer (IJAMSVILLE, MD United States)
This product works great. Hands free attachment makes it easy to use. Everyone needs on.

 "Great product!" 2009-04-08
By D. Macgill (WA USA)
I got this to replace the wand-like inflator that came in a standard Craftsman tire inflation kit. I have used this once on all four tires and found it worked as advertised. It is easier to keep on the tire stem than the wand inflator. The clip didn't get in the way, though it may pull the hose out of alignment when set too far on the stem causing air to leak out of the tire. It is a nice feature, though, I don't have to hold it on the stem. The pressure gauge reading was high (but consistantly high) by about 2 pounds--easy to adjust for. Overall, a major improvement over my old inflator. I recommend it.

 "unfortunate design for some tires, weak clip, poor spring assembly" 2009-02-12
By Dave92270 (CA, United States)
The chuck and clip design doesn't work on some of my tires; it won't go deep enough on the tire stem. I saw this mentioned in a few other reviews. Besides that, the spring in the clip slipped out yesterday and keeps popping out even after I disassembled/reassembled the clip - there is no detent to hold the spring's "foot" on the metal base so it slips out repeatedly . I'm going to buy another inflator...

 "Zero Stars - Piece of junk" 2009-02-02
By vjmvjmvjm (Kemptown, MD)
Gauge did not work immediately upon opening package and attaching to air hose. Poor quality control.

 "fast tire pressure adjustments" 2009-01-18
By The Engineer (California)
Good about this tire inflator is the pressure release button. Bad is the "clip-on hands-free design" because it does not work: air is hissing out at all times because the hose is too stiff and too short hence pulling at the clip. The only way to use this unit is to keep the hose pressed onto the tire with one hand while making pressure adjustments with the other hand. I would give this unit 5 stars if it had a standard tire chuck with a 2 feet hose instead of this non-functional "clip-on" design.


Images Product

Buy Campbell Hausfeld MP6000 Tire Inflator with Gauge Now